Vennligst vent...
Produktet ble lagt i handlekurven. Se handlekurven her
Tom handlekurv

ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub

Forsiden Kommunikasjon Hubs/Splitters ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub
Du må logge inn for å handle/se priser.
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)
ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub (K088B-008B)

ACCELL Splitter DP1.2 til 3 HDMI Multi-Display MST Hub

Varenr.:
K088B-008B
EAN:
0826388109407
  • Porter 0
  • Display porter 0
  • HDMI porter 3
  • Nettverk 0
Beskrivelse

Easily Extend or Expand Your Desktop
The Accell UltraAV DisplayPort 1.2 to 3 HDMI Multi-Display MST Hub allows you to enjoy up to three independent HDMI monitors from a single DisplayPort output while utilizing the new multi-stream transport (MST) protocol.
Supports up to 3 Displays Independently
The MST Hub can support up to three high-resolution displays independently, two monitors with resolutions up to 1920x1080 @60Hz and the third monitor up to 2560x1600 @60Hz*. With the UltraAV MST Hub you can chose to expand a single image across three displays, perfect for high resolution gaming. For the efficiency and productivity of multi-tasking, easily dedicate each display to a separate application.
*The maximum resolution is dependent on the throughput of DP 1.2 or HDMI 1.4 as well as the graphics and display solution used.
For a digital signage or video wall application, use two MST Hubs with a video card that supports multiple DisplayPort outputs. This setup will provide enough video ports to support up to 6 monitors independently. The use of multiple MST Hubs requires a computer and a graphics system with enough display pipes to support the multi-display array.
- Utilizes new Multi-Stream Transport (MST) protocol (DP 1.2 required)
- Supports DisplayPort per lane data rates up to 5.4 Gbps (HBR2)
- Compatible with DVI displays using optional adapters
- Compatible to HDMI 1.4a specification up to 10.2Gbps per port
- Supports 3D video formats
- Standards compliance: DisplayPort v1.2/1.1a, VESA DDM, HDCP V1.3 and EDID V1.4
- Supports input pixel data depth 6/8/10/12 bits
- Supports output pixel format RGB444
- Using 3 displays: 2 displays at 1920x1080 @60Hz and 1 display at 2560x1600 @60Hz
- Using 2 displays: 1 display at 2560x1600 @60Hz and 1 display at 1920x1200 @60Hz
- Using 1 display: Supports 4Kx2K @30Hz video formats

Selv om vi gjør vårt beste for å gi relevant informasjon, så er bildene kun for å gi et generelt inntrykk, og selve varen er ikke nødvendigvis akkurat slik som avbildet. Dersom det er forskjeller mellom produktoverskrift, beskrivelse og bilde, så er det produktoverskriften som gjelder (f.eks. PCer kommer ikke nødvendigvis med skjerm selv om bildet viser det). Hvis noe er uklart, vennligst send epost til kundestøtte før du bestiller. Vi tar forbehold om trykkfeil og endring av priser og spesifikasjoner uten varsel.